教育及工作经历（含交大材料学院）

教师简介

胡佳其博士于2024年9月加入西安交通大学材料学院、陕西省镁基新材料工程研究中心单智伟教授团队，担任助理教授。博士毕业于天津大学，化工过程机械专业“计算机辅助可靠性工程（CARE）”实验室，在高红研究员、陈旭教授的联合指导下完成博士研究工作。胡佳其博士长期致力于镁合金强韧化设计、疲劳损伤机理、镁基新材料开发等相关研究，以第一/通讯作者身份在J. Magnes. Alloys，Int. J. Fatigue，Mater. Sci. Eng. A，Theor. Appl. Fract. Mech.J.等期刊发表SCI论文10篇，入选2025年度博士后创新人才支持计划。

Dr. Jiaqi Hu joined Professor Zhiwei Shan’s team at the Shaanxi Engineering Research Center for Magnesium-Based New Materials, School of Materials Science and Engineering, Xi’an Jiaotong University, in September 2024 as an assistant professor. Dr. Hu received his Ph.D. in Chemical Process Machinery from Tianjin University, where he conducted his doctoral research in the Computer Aided Reliability Engineering (CARE) Laboratory under the supervision of Professor Xu Chen and Research Fellow Hong Gao. Dr. Hu has long been engaged in research on the strengthening and toughening design of magnesium alloys, fatigue damage mechanisms, and the development of magnesium-based new materials. As first author or corresponding author, he has published 10 SCI papers in journals such as Journal of Magnesium and Alloys, International Journal of Fatigue, Materials Science and Engineering A, and Theoretical and Applied Fracture Mechanics. He was selected for the 2025 Postdoctoral Innovative Talent Support Program.

代表成果

科研项目

博士后创新人才支持计划，2025.06-2027.06，8万元，主持，在研

丝绸之路经济带创新驱动发展试验区、乌昌石国家自主创新示范区科技发展计划（课题1），2025.11-2027.11，75万元，主持，在研

代表成果列表

1. Hu J, Liu Z, Ning Z, et al. Effects of orientation on the fatigue crack growth behaviors of the ZK60 magnesium alloy in air and PBS. Journal of Magnesium and Alloys, 2024, 12(1): 281-294.

2. Hu J, Li G, Ding R, et al. Achievement of high strength and superior fatigue resistance in ZK60 magnesium alloy using a designed room-temperature multi-directional compression. Materials Science and Engineering: A, 2026, 949: 149434.

3. Hu J, Gao H, Meng Y, et al. Effects of free-end torsion on the microstructure evolution and fatigue properties in an extruded AZ31 rod. Materials Science and Engineering: A, 2018, 726: 215-222.

4. Hu J, Yang G, Liu Z, et al. Effects of deep cryogenic treatment on microstructure, mechanical, and corrosion of ZK60 Mg alloy. Journal of Materials Research and Technology, 2023, 26: 3686-3700.

5. Hu J¹, Liang X¹, Shi W, et al. Influence of pre-torsion and low-temperature aging on ZK60 magnesium alloy. Journal of Magnesium and Alloys, 2025, 13(9): 4460-4474.

6. Hu J¹, Nie X¹, Fu S, et al. Effects of pre-compression modes on mechanical properties and fatigue behaviors of rolled ZK60 magnesium alloy. International Journal of Fatigue, 2024, 183: 108235.

7. Liang X¹, Hu J^1,*, Gao H^*. Research on the stress corrosion cracking behavior of ZK60 magnesium alloy enhanced by multi-directional compression process. Journal of Magnesium and Alloys, 2026: 101976.

8. Wang J¹, Hu J¹, Jin P, et al. Fracture parameters analysis of compact tension specimens with deflected fatigue cracks: ZK60 magnesium alloy. Theoretical and Applied Fracture Mechanics, 2023, 127: 104068.

9. Shi W¹, Hu J¹, Sun K, et al. An experimental study of anisotropic fatigue behavior of rolled ZK60 magnesium alloy. Materials Science and Engineering: A, 2022, 859: 144254.

10. Hu J, Li Q, Gao H. Influence of Twinning Texture on the Corrosion Fatigue Behavior of Extruded Magnesium Alloys. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 65-76.