匡 杰

职 称:

所在系所:强度研究室

个人主页:https://gr.xjtu.edu.cn/web/kuangjie https://scholar.google.com/citations?hl=en&user=kEa9fnYAAAAJ&view_op=list_works&alert_preview_top_rm=2&sortby=pubdate

E-MAIL:kuangjie@xjtu.edu.cn

专业方向:金属材料塑性加工与强韧化

一、研究领域或方向

主要针对Al, Mg等结构金属材料开展研究,当前的研究兴趣包括:

塑性加工工艺设计及合金强韧化机理

晶体塑性、力学各向异性及织构调控

多场耦合条件下的塑性变形与再结晶机制


二、教育背景

2015.03 - 2016.05    俄亥俄州立大学,材料科学与工程系,联合培养博士

2011.09 - 2017.07    清华大学,材料学院,工学博士

2007.09 - 2011.07    中南大学,材料科学与工程学院,工学学士


三、工作经历

2015/03-2016/05     博士联合培养,俄亥俄州立大学

2021.08 - 至今      西安交通大学,材料科学与工程学院强度研究室,副教授

2017.08 - 2021.07    西安交通大学,材料科学与工程学院强度研究室,讲师


四、科研项目

镁合金电致塑性轧制织构优化的合金化效应研究,国家自然科学青年基金项目51801147,2019.1~2021.12,33.6万,主持;

薄带连铸轻合金的强韧化与服役性能,国家自然科学基金重大项目51790482,2018.1~2022.12,300万,参与

锆合金形变各向异性行为与组织结构调控机理研究,中国核动力研究设计院,2020.1~2021.12,24万,参与

铝合金导体材料样品制备及微观组织分析, 全球能源互联网研究员有限公司,2020.6~2021.4,37万,参与


五、代表性论文

[1] J. Kuang*, X. Zhao, Y. Zhang, J. Zhang*, G. Liu*, J. Sun, G. Xu, Z. Wang. Impact of thermal exposure on the microstructure and mechanical properties of a twin-roll cast Al-Mn-Fe-Si strip, Journal of Materials Science & Technology, 107 (2022) 83-96.

[2] J. Kuang*, Y. Zhang, X. Du, J. Zhang*, G. Liu*, J. Sun. On the Strengthening and Slip Activity of Mg-3Al-1Zn alloy with Pre-induced {10-12} twins, Journal of Magnesium and Alloys, in press.

[3] C. Zhang, X. Bao, D. Zhang, W. Chen, J. Zhang*, J. Kuang*, G. Liu, J. Sun. Achieving superior strength-ductility balance in a novel heterostructured strong metastable β-Ti alloy, International Journal of Plasticity, 147 (2021) 103126.

[4] D. Zhang, J. Zhang*, J. Kuang*, G. Liu*, J. Sun. Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications, Acta Materialia, 220 (2021) 117288.

[5] J. Kuang*, X. Du, T. Al-Samman, X. Li, G. Liu*, J. Sun. On the texture weakening during electropulse annealing treatment of Mg-1Ce alloy: The role of nucleation and nucleus growth, Metallurgical and Materials Transactions A, 12 (2020) 6640-6657.

[6] X. Zhao, J. Kuang*, K. Shi, P. Zhang, H. Xue, J. Zhang*, G. Liu*, J. Sun, G. Xu, Z. Wang. Heterogeneous microstructure-mediated ductile fracture of twin-roll cast Al–Mn strip, Materials Science and Engineering: A 783 (2020) 199222-199231.

[7] J. Kuang, T.S.E. Low, S.R. Niezgoda, X. Li, Y. Geng, A.A. Luo*, G. Tang*. Abnormal texture development in magnesium alloy Mg–3Al–1Zn during large strain electroplastic rolling: Effect of pulsed electric current, International Journal of Plasticity 87 (2016) 86-99

[8] J. Kuang, X. Li, R. Zhang, Y. Ye, A.A. Luo*, G. Tang*. Enhanced rollability of Mg 3Al 1Zn alloy by pulsed electric current: a comparative study, Materials & Design 100 (2016) 204-216.

[9] J. Kuang, X. Du, X. Li, Y. Yang, A.A. Luo*, G. Tang*. Athermal influence of pulsed electric current on the twinning behavior of Mg–3Al–1Zn alloy during rolling, Scripta Materialia 114 (2016) 151-155.

[10] J. Kuang, X. Li, X. Ye, J. Tang, H. Liu, J. Wang, G. Tang*. Microstructure and texture evolution of magnesium alloys during electropulse treatment, Metallurgical and Materials Transactions A 46 (2015) 1789-1804.