姓 名: 宁 杰
职 称: 助理教授
所在系所: 焊接与涂层研究所
联系电话: 17719567787
E-MAIL: j_ning@xjtu.edu.cn
专业方向: 激光焊接、激光电弧复合焊接、激光增材制造、焊接过程熔池和小孔三维流体动力学数值模拟
个人详情

研究领域或方向
激光焊接、激光电弧复合焊接、激光增材制造、焊接过程熔池和小孔三维流体动力学数值模拟
工作经历
2020-03至现在,西安交通大学,材料加工工程,助理教授
教育经历
(1) 2016-03至2019-12,西安交通大学,材料加工工程,博士
(2) 2017.09至2018-09,美国普渡大学,机械工程,联合培养博士
(3) 2013-09至2016-03,西安交通大学,材料加工工程,硕士
(4) 2009-09至2013-06,石家庄铁道大学,材料科学与工程
科研项目
主持或参加纵向项目(课题)情况(按起始时间倒序排序):
(1) 科技部, 国家重点研发计划项目子课题, 2018YFB1105803HZ, 面向载能束增材修复与再制造的集约化合金设计与制备, 2018-05至现在, 221万, 在研, 参加
(2) 国家自然科学基金委员会, 面上项目,51775416, 钼合金燃料包壳激光深熔焊接头的合金化强韧机制与“寄生”钎焊同步增强效应, 2018-01至现在, 60万, 在研, 参加
(3) 国家自然科学基金委员会, 面上项目,51275391,高反射率材料大功率光纤激光/MIG电弧复合焊气/液界面热-力耦合行为及调控机理研究,2013-01至2016-12,76万元,已结题,参加
主持或参加横向项目(课题)情况(按起始时间倒序排序):
(1) 中国石油天然气集团公司管材研究所, 横向项目,特殊地况及特殊连接接头的管道对接环焊缝在施工和服役过程中的受力分析研究,2016-12至2017-05,20万元,已结题,参加
(2) 金堆城钼业股份有限公司, 横向项目,钼合金激光焊与接头性能检测,2016-10至2016-12,20万元,已结题,参加
(3) 西安航天动力机械厂, 横向项目,胀形对2219环锻件残余应力影响研究,2016-06至2016-11,1.4万元,已结题,参加
(4) 西安航天动力机械厂, 横向项目,某超高强钢容器马鞍形焊缝全位置焊接残余变形模拟分析,2015-11至2016-01,12.5万元,已结题,参加
(5) 西安航天四院, 横向项目,某高强钢结构件残余应力测试分析,2015-04至2015-05,3.75万元,已结题,参加
学术成果
目前共发表论文29篇,其中SCI论文27篇,总被引约150余次。其中以一作论文12篇,通讯作者论文4篇,包括Addit Manuf, Mater Des., J. Mater. Process. Tech., Alloys Compd.等。申请发明专利14项,已授权8项。获得2020年度陕西省高等学校科学技术将一等奖1项。
第一作者论文
(1) Ning J, Zhang LJ*, Han CQ, Zhang HB, Lei XW, Han BF. Fiber laser welding characteristics of the butt welded joint of novel ultralight Mg-10.1Li-3.1Al-2.9Zn alloy. Mater Res Express 6(10): 106545.
(2) Ning J, Zhang LJ* (corresponding author), Yin XQ, Zhang JX, Na SJ (2019). Mechanism study on the effects of power modulation on energy coupling efficiency in infrared laser welding of high-reflectivity materials. Mater & Des 178(15): 10871.
(3) Ning J, Zhang LJ*, Yang JN, Yin XQ, Wang XW, Wu J (2019). Characteristics of multi-pass narrow-gap laser welding of D406A ultra-high strength steel. J Mater Process Tech 270:168-181.
(4) Ning J, Hong KM, Inamke GV, Shin YC*, Zhang LJ (2019). Analysis of microstructure and mechanical strength of lap joints of TZM alloy welded by a fiber laser. J Manuf Process 39:146-159.
(5) Ning J, Zhang LJ*, Bai QL, Yin XQ, Niu J, Zhang JX (2017). Comparison of the microstructure and mechanical performance of 2A97 Al-Li alloy joints between autogenous and non-autogenous laser welding. Mater & Des 120:144–156.
(6) Ning J, Zhang LJ*, Jiang GC, Xie MX, Yin XQ, Zhang JX (2017). Narrow gap multi-pass laser butt welding of explosion welded CP-Ti/Q235B bimetallic sheet by using a copper interlayer. J Alloys Compd 701: 587-602.
(7) Ning J, Zhang LJ*, Sun MJ, Yin XQ, Niu J, Zhang JX (2017). Studies of the characteristics and size effects of softened zone of laser welded 20MnTiB joint. J Mater Process Tech 243:405-419.
(8) Ning J, Zhang LJ*, Na SJ, Yin XQ, Niu J, Zhang JX, Wang HR (2017). Numerical study of the effect of laser-arc distance on laser energy coupling in pulsed Nd: YAG laser/TIG hybrid welding. Int J Adv Manuf Technol 91(1129-1143).
(9) Ning J, Zhang XJ, Zhang LJ* (2017). Research of the energy coupling behavior in modulated fiber laser welding of high reflectivity AZ31 Mg alloy. Rare Metal Mat Eng 46(5):1437-1444.
(10) Ning J, Zhang LJ*, Xie MX, Yang HX, Yin XQ, Zhang JX (2016). Microstructure and property inhomogeneity investigations of bonded Zr/Ti/Steel trimetallic sheet fabricated by explosive welding. J Alloys Compd 698:835–851.
(11) Ning J, Zhang LJ*, Wang A, Bai QL, Yang JN, Zhang JX (2016). Effects of double-pass welding and extrusion on properties of fiber laser welded 1.5-mm thick T2 copper joints. J Mater Process Tech 237:75-87.
(12) 宁杰, 张兴军, 张林杰. 激光在紫铜焊接中的应用研究进展. 激光杂志, 2015, 36(3):1-6.
通讯作者论文
(13) Wen J H , Zhang L J*, Ning J*, Xue F, Lei X W, Zhang J X, Na S J (2020). Laser additively manufactured intensive dual-phase steels and their microstructures, properties and corrosion resistance, Mater & Des 10870.
(14) Li S, Zhang L J*, Ning J*, Wang X, Zhang G F, Na S J, Fatemeh B (2020). Comparative study on the microstructures and properties of wire+arc additively manufactured 5356 aluminium alloy with argon and nitrogen as the shielding gas, Addit Manuf 101206.
(15) Zhang L J, Zhang G F, Bai X Y, Ning J* , Zhang XJ (2016). Effect of the process parameters on the three-dimensional shape of molten pool during full-penetration laser welding process. Int J Adv Manuf Technol 86(5-8):1-14.
(16) Zhang L J, Zhang X J, Ning J* , Zhang J X (2014). Modulated fiber laser welding of high reflective AZ31. Int J Adv Manuf Technol 76(1-4):721-733.
共同作者论文
(17) Zhang LJ*, Ning J, Zhang XJ, Zhang GF, Zhang JX (2015). Single pass hybrid laser–MIG welding of 4-mm thick copper without preheating. Mater & Des 74:1-18.
(18) Long J, Zhang L J*, Zhang L L, Ning J, Yin X Q, Zhang J X, Na S J (2020). Fiber laser spot welding of molybdenum alloy in a hyperbaric environment, Optics Express 28(6): 7843-7857.
(19) Zhang L L, Zhang L J*, Long J, Ning J, Zhang J X, Na S J (2019). Effects of titanium on grain boundary strength in molybdenum laser weld bead and formation and strengthening mechanisms of brazing layer. Mater & Des 169: 107681.
(20) Zhang L J, Liu J Z*, Pei J Y, Ning J, Zhang L L, Long J, Zhang G F, Zhang J X, Na S J (2019). Effects of Power Modulation, Multipass Remelting and Zr Addition Upon Porosity Defects in Laser Seal Welding of End Plug to Thin-Walled Molybdenum Alloy. J Manuf Proces 41: 197–207.
(21) Zhang L J, Lu G F*, Ning J, Zhu Q, Zhang J X, Na S J (2019). Effects of minor Zr addition on the microstructure and mechanical properties of laser welded dissimilar joint of titanium and molybdenum. Mater Sci Eng A 742: 788-797.
(22) Zhang LJ*, Lu GF, Ning J, Zhang LL, Long J, Zhang GF (2018). Influence of Beam Offset on Dissimilar Laser Welding of Molybdenum to Titanium. Materials 11(10):1852.
(23) Yang J N, Zhang L J*, Ning J, Bai Q L, Pei J Y, Liu J Z, Lu G F, Zhang J X (2018). Fiber laser welding characteristics of commercially pure zirconium (R60702) and structure-mechanics-corrosion performances of the joint. Int J Refract Met H, 73:58-73.
(24) Lu G F, Zhang L J*, Pei Y, Ning J, Zhang J X (2018). Study on the Size Effects of H-Shaped Fusion Zone of Fiber Laser Welded AZ31 Joint. Metals 8: 198.
(25) Yang J N, Zhang L J*, Ning J, Bai Q L, Yin X Q, Zhang J X (2017). Single-pass hybrid laser-MIG welding of 8-mm-thick pure copper (T2) without preheating: weld geometry and integrity. Int J Adv Manuf Technol, 91(9-12): 3749-3773.
(26) Yang JN, Zhang LJ*, Ning J, Bai QL, Yin XQ, Zhang JX(2017). Single pass laser-MIG hybrid welding of 8 mm thick pure copper T2 without preheating microstructure and properties. Appl therm Eng 126:867-883.
(27) Zhang L J, Bai Q L*, Ning J, et a (2016). A comparative study on the microstructure and properties of copper joint between MIG welding and laser-MIG hybrid welding. Mater & Des 110:35-50.
(28) Zhang L J, Zhang G F*, Ning J, Zhang X J, Zhang J X (2015). Microstructure and properties of the laser butt welded 1.5-mm thick T2 copper joint achieved at high welding speed. Mater & Des 88:720-736.
(29) Wang A, Zhang L J, Ning J, Bai Q L, Yang J N (2016). Effects of welding speed on the laser welded joint of 2A97 Al-Li alloy. Laser Journal 02: 098. 王安, 张林杰, 宁杰, 白清林, 杨健楠. (2016). 焊接速度对2A97铝锂合金激光焊接头的影响. 激光杂志 02: 098.
发明专利
(1) 张林杰; 白清林; 裴俊宇; 宁杰; 杨健楠; 孙院军; 安耿; 朱琦; 李思功; 龚星; 李锐; 任啟森; 刘彤; 一种基于微合金化与同步寄生钎焊的钼合金熔焊方法, 2020-03-31, 中国, ZL201710284251.0.
(2) 张林杰; 白清林; 宁杰; 张亮亮; 龙健; 林涛; 马宏波; 一种核燃料棒包壳高压充氦与激光焊接成套焊接设备, 2020-03-17, 中国, ZL2018102366241.
(3) 张林杰; 白清林; 裴俊宇; 宁杰; 杨健楠; 孙院军; 安耿; 朱琦; 李思功; 龚星; 李锐; 任啟森; 刘彤; 一种提高钼及钼合金熔焊焊缝强韧性的微合金化方法, 2020-01-14, 中国, ZL2017102834552.
(4) 张林杰; 裴俊宇; 宁杰; 白清林; 杨健楠; 刘江哲; 卢广峰; 张贵锋; 殷咸青; 张建勋; 基于波形调制的钼及钼合金对接接头的脉冲激光焊接方法, 2019-06-11 中国, ZL2017108126340.
(5) 张林杰; 刘江哲; 王小艳; 魏帆; 宁杰; 白清林; 杨健楠; 提高机械结合型双金属复合管中覆层与基层结合强度的方法, 2019-03-01, 中国, ZL2017104333271.
(6) 张林杰; 白清林; 殷咸青; 宁杰; 杨健楠; 裴俊宇; 刘江哲; 张建勋; 一种基于阶梯孔法的内部残余应力测量方法, 2019-02-05, 中国, ZL2016108751826.
(7) 张林杰; 白清林; 宁杰; 杨健楠; 裴俊宇; 刘江哲; 张建勋; 以T2紫铜作为过渡层的钛-钢复合板激光填丝对接焊方法, 2017-12-15, 中国, ZL2016106171718.
(8) 张林杰; 张兴军; 宁杰; 张建勋; 厚钢板激光全穿透焊接熔池三维形状检测及重构方法, 2017-10-20, 中国, ZL2014102137827.
(9) 张林杰; 宁杰; 杨健楠; 张延斌; 吴军; 胡美娟; 齐丽华; 池强; 张颖云; 徐梅; 朱增辉; 一种厚板单面填充焊接接头参与应力变形控制方法, 2018-12-27, 中国, CN201811616715.4.
(10) 张亮亮, 张林杰, 宁杰, 龙健, 王祥, 李森, 孙旭;通过固体渗碳方式提高钼及钼合金熔焊焊缝强度的方法;2019-04-22, 中国, CN201910324395.3
(11) 温家浩, 张林杰, 张乾乾, 宁杰, 张亮亮, 李森, 刘江哲, 殷咸青, 张建勋;基于超声波驻场防止熔池下榻的发卡式接头焊缝控形系统; 2019-10-18, 中国, CN201910995351
(12) 张林杰, 裴俊宇, 宁杰, 白清林, 杨健楠, 刘江哲, 卢广峰, 牛靖, 殷咸青, 张贵锋, 张建勋, 朱琦, 安耿, 孙院军, 李思功, 龚星, 李锐, 任啟森, 刘彤; 一种基于热循环调控的钼及钼合金激光焊接方法;2017-09-29, 中国, CN201710909722.2
(13) 张林杰, 杨健楠, 宁杰, 白清林, 裴俊宇, 刘江哲, 卢广峰, 张建勋, 殷咸青; 基于功率调制改善紫铜激光-电弧复合焊稳定性的方法; 申请日: 2017-06-09, 中国, 申请号: 201710434499.0
(14) 张林杰, 卢广峰, 宁杰, 杨建楠, 白清林, 裴俊宇, 刘江哲; 评估正弦调制影响高反射率材料激光焊能量耦合行为的方法; 申请日: 2017-06-09, 中国, 申请号: 201710433335.6

获得学术奖励
(1) 宁杰(4/11); 轻量化/新能源关键材料激光深熔焊接小孔熔池动力学行为与形性调控, 陕西省教育厅, 陕西省高等学校科学技术奖, 一等奖, 2020(张林杰; 张建勋; 高晓龙; 宁杰; 刘晶; 张贵锋; 殷咸青; 牛靖; 刘宏; 白清林; 杨健楠).